 |
 |
 |
|
Semi Automatic Paper Cutter -MBM 18 Inch Semi-Automatic Automatic Electric Paper Cutter Triumph 4810 |
|
 |
|
 |
 |
|
 |
|
Need Help? Call 1-866-432-0042
Semi Automatic Paper Cutter -MBM 18 Inch Semi-Automatic Automatic Electric Paper Cutter Triumph 4810
MBM 18 Inch Semi-Automatic Automatic Electric Paper Cutter Triumph 4810-D
The MBM Triumph 4810 electric paper cutter is a semi-automatic cutter that cuts paper up to 18" wide and stacks of paper up to 3" high. A spindle clamping system firmly secures the paper during the cutting process and the two side guides on the front table also make sure that even small paper is perfectly aligned. The MBM Triumph 4810 electric paper cutting machine comes with a convenient shelf for extra storage. For the operator's safety, the cutter features a motor protection switch, safety guards on front and rear tables, a safety key to lock blade and a disk brake for instant blade stop.
FEATURES
Digital measurement readout in cm or inches (accurate to 1/10 mm or 1/100 inch)
control module features repeat cut and eject functions
eletric blade and back gauge drive
Solingen steel blade
solid steel blade carrier and adjustable blade guides
spindle clamping system applies even pressure along entire cutting width
dual side guides on front and rear tables
spindle-guided back gauge with narrow separations and plastic gliders
electronic hand wheel with variable speed control for manual back gauge setting
bright, LED optical cutting line
all-metal construction
stand with storage shelf
UL and C UL approved
SPECIFICATIONS
Cutting width 18 7/8"
Cutting height 3"
Narrrow cut 1 3/8"
Cutting length behind blade 17 11/16"
Table length in front of blade 13 5/8"
Motor 1.5 hp
Power supply 115 V, 60 Hz
Dimensions (D x W x H) : 38 1/4" x 29 3/4" x 53 1/2"
Shipping Weight :531 lbs.
List Price: $6,699.00
Sale Price: $6,299.00
|
|
| Specification |
Value |
| Blade to backstop |
18 in. |
| Max. Paper Cutting Height |
3 in. |
| Max. Paper Cutting Length |
19 in. |
| Max. Paper Cutting Width |
18.75 in. |
| Voltage |
115 volts |
| Warranty |
MBM Corporation warrants to the original purchaser for a period of time from the date of shipment, that its products will be free from defects in material and workmanship when used under normal operating conditions. Warranty stages are:
DESTROYIT SHREDDERS:
Five (5) years on strip-cut cutting wheels/shafts
Five (5) years on cross-cut cutting wheels/shafts
One (1) year on government specifications including micro cut models
One (1) year warranty on all other parts (excluding wearables)*
TRIUMPH CUTTERS, KUTRIMMERS, BOOKLETMAKERS: 2000, 6100, FOLDERS, MAXXUM COLLATORS, STAPLERS (Model 91), JOGGER and PAPER CART:
One (1) year limited warranty (excluding wearables)*
SPRINT 5000 BOOKLETMAKER:
Three (3) year limited warranty on all parts (excluding wearables)*
INTERFACES & TRIMMERS
One (1) year limited warranty on all parts (excluding wearables)*
DRILLS
One (1) year limited warranty on motor, Ninety (90) days on all other parts (excluding wearables)*
REPLACEMENT PARTS
One (1) year limited warranty on mechanical parts, ninety (90) days limited warranty on electrical and electronic parts
MBM agrees to repair or replace, at its option, any defective part or component covered by this warranty, provided there was no abuse and MBM must first receive written notice of a defect within the applicable warranty period. Warranties do not include labor or the payment of any labor charges or incidental or consequential expenses. All parts are shipped FOB N. Charleston, SC. Warranty claims must be submitted with replacement part order.
*Examples of wearables are: knives, sticks, light bulbs, rubber rollers, belts, feed stones, separator pads, fuses, gears, chains, clutches, brakes, etc. |
Need Help? Call 1-866-432-0042
|
|
 |
|
 |
|
