 |
 |
 |
|
Sheet Material |
|
 |
|
 |
 |
|
 |
|
Need Help? Call 1-866-432-0042
Back To <b>Multi Purpose Cutters
|
KeenCut General Purpose Cutters
|
|
|
Big Bench for KeenCut Practik Large Format Precision Cutter 120 inch- 60918
Price: $999.95
Sale Price: $899.95
|
Big Benchfor KeenCut Practik Large Format Precision Cutter 120 inch- 60918 - 60918
|
|
|
Excalibur Cutter Medium Duty Utility Blades 69108
Price: $25.00
Sale Price: $21.99
|
Excalibur Cutter Medium Duty Utility Blades. For cutting standard material up to 3/8” (.375) thickDon't get caught without a blade for you Excalibur Cutter. Have a box of 100 on hand and avoid production delays.
|
|
|
Excalibur Cutter Xtra-Long Utility Cutting Blade (Box 100) 69120
Price: $30.00
Sale Price: $27.99
|
Excalibur Cutter Xtra-Long Utility Cutting Blade (Box of 100)Don't get caught without a blade for you Excalibur Cutter.
For cutting standard material up to 1/2” (.5) thick This blade is a bit longer and thicker than the standard Medium Duty Blade. The benefit of having a thicker blade is for a more stable cut in thicker material where the medium duty may have a tendency to wobble.
|
|
|
Guided Razor Safety Flexo Plate Cutter 86" 60820
Price: $1,395.00
Sale Price: $1,159.95
|
This new Guided Razor Safety Flexo Plate Cutter gives straight, clean cuts every time with no exposed blades. Minimize the risk of injury and re-makes from bad cuts. Lift-Arm mechanism allows you to easily position plates for precision cutting with no second-guessing on the location of the cut. Comes with replaceable self-healing cutting mat with grid sheet that provides firm cutting surface.
Key Features:
Dual cutting head features both 45° beveled edge and 90° perpendicular blade holders
Each blade holder is spring loaded and retracts when not in use
Standard medium-duty utility blades are easy to change
Available in 16", 32", 50", 64" and 86" cut lengths
Special low track gripper tape underside prevents plates from slipping during cutting
Each cutter supplied with self healing cutting mat with reference grid
|
|
|
KeenCut 60 inch Javelin Cutter 60181
Price: $660.00
Sale Price: $569.97
|
KeenCut 60 inch Javelin Cutter 60181
The Javelin is an ingenious cutting solution which offers a standard of straight, square and clean cutting that is impossible to achieve with a craft knife and straight edge. A safe, simple, extreme precision cutter requiring no special skills, the Javelin was specifically designed to cut large format graphics, pop ups, signs, plastic panels and much more. The unique design of the Javelin enables its straightness to be factory adjusted, using laser technology, to meet with today's very high standards for accurate butt joints on sectional panels and pop-up systems. The Javelin was specifically designed to cut large format graphics, pop-ups, signs, plastic panels and much more.
Whether used alone as a moveable cutting bar or in conjunction with the Keencut BIG bench to create a superb cutting table the Javelin is truly in a class of its own. Using the Javelin with the BIG bench could not be easier, just place the cutter bar on the material to be cut, align it with the image registration or crop marks, depress the cutting head and push or pull it along to cut. The BIG bench is recommended to ensure straightness and accuracy. The Javelin cutter bar is fitted with two full length rubber strips on the underside that grip tenaciously to any surface without marking Factory Laser truing guarantees accuracy to within .008” over the full length of the cut. For an even more precise cut add the Lift & Hold Mechanism to your workbench allowing you to turn your existing work surface into a precision cutting station. The lift and hold is recommended for cutters up to 80 inches.
FEATURES:
Ingenious cutting solution providing extremely straight, square and clean cuts impossible by hand
Uses standard replacement blades
Ergonomically contoured cutting head allows operator to comfortably push or pull it along to cut.
Includes 100 standard medium duty blades that can be changed in seconds with no tools.
Comes with wall-mounted brackets for storing cutters out of the way.
Ideal for Cutting:
Foam board and gatorboard up to 3/8 inch
Mat board and Cardboard
Flexo plates up to .3" (unprocessed and processed).
PVC foam board up to .25" thick.
Foam centered board up to 1/4" thick, 0.5" with optional XR-Utility Blade.
Honeycomb and corrugated plastics.
Vinyl and plastic film.
Cardboard & corrugated cardboard.Shipping Information: Dimensions: 68 L. x 8 W. x 4 H. Inches. Weight: 19 lbs. Ships UPS Ground.
|
|
|
KeenCut Javelin Cutter 100 inch 60183
Price: $825.00
Sale Price: $699.97
|
The Javelin is an ingenious cutting solution which offers a standard of straight, square and clean cutting that is impossible to achieve with a craft knife and straight edge. A safe, simple, extreme precision cutter requiring no special skills, the Javelin was specifically designed to cut large format graphics, pop ups, signs, plastic panels and much more. The unique design of the Javelin enables its straightness to be factory adjusted, using laser technology, to meet with today's very high standards for accurate butt joints on sectional panels and pop-up systems. The Javelin was specifically designed to cut large format graphics, pop-ups, signs, plastic panels and much more.
Whether used alone as a moveable cutting bar or in conjunction with the Keencut BIG bench to create a superb cutting table the Javelin is truly in a class of its own. Using the Javelin with the BIG bench could not be easier, just place the cutter bar on the material to be cut, align it with the image registration or crop marks, depress the cutting head and push or pull it along to cut. The BIG bench is recommended to ensure straightness and accuracy. The Javelin cutter bar is fitted with two full length rubber strips on the underside that grip tenaciously to any surface without marking Factory Laser truing guarantees accuracy to within .008” over the full length of the cut. For an even more precise cut add the Lift & Hold Mechanism to your workbench allowing you to turn your existing work surface into a precision cutting station. The lift and hold is recommended for cutters up to 80 inches.
FEATURES:
Ingenious cutting solution providing extremely straight, square and clean cuts impossible by hand
Uses standard replacement blades
Ergonomically contoured cutting head allows operator to comfortably push or pull it along to cut.
Includes 100 standard medium duty blades that can be changed in seconds with no tools.
Comes with wall-mounted brackets for storing cutters out of the way.
Ideal for Cutting:
Foam board and gatorboard up to 3/8 inch
Mat board and Cardboard
Flexo plates up to .3" (unprocessed and processed).
PVC foam board up to .25" thick.
Foam centered board up to 1/4" thick, 0.5" with optional XR-Utility Blade.
Honeycomb and corrugated plastics.
Vinyl and plastic film.
Cardboard & corrugated cardboard.
|
|
|
KeenCut Javelin Cutter 120 inch 60184
Price: $1,035.00
Sale Price: $859.97
|
The Javelin is an ingenious cutting solution which offers a standard of straight, square and clean cutting that is impossible to achieve with a craft knife and straight edge. A safe, simple, extreme precision cutter requiring no special skills, the Javelin was specifically designed to cut large format graphics, pop ups, signs, plastic panels and much more. The unique design of the Javelin enables its straightness to be factory adjusted, using laser technology, to meet with today's very high standards for accurate butt joints on sectional panels and pop-up systems. The Javelin was specifically designed to cut large format graphics, pop-ups, signs, plastic panels and much more.
Whether used alone as a moveable cutting bar or in conjunction with the Keencut BIG bench to create a superb cutting table the Javelin is truly in a class of its own. Using the Javelin with the BIG bench could not be easier, just place the cutter bar on the material to be cut, align it with the image registration or crop marks, depress the cutting head and push or pull it along to cut. The BIG bench is recommended to ensure straightness and accuracy. The Javelin cutter bar is fitted with two full length rubber strips on the underside that grip tenaciously to any surface without marking Factory Laser truing guarantees accuracy to within .008” over the full length of the cut. For an even more precise cut add the Lift & Hold Mechanism to your workbench allowing you to turn your existing work surface into a precision cutting station. The lift and hold is recommended for cutters up to 80 inches.
FEATURES:
Ingenious cutting solution providing extremely straight, square and clean cuts impossible by hand
Uses standard replacement blades
Ergonomically contoured cutting head allows operator to comfortably push or pull it along to cut.
Includes 100 standard medium duty blades that can be changed in seconds with no tools.
Comes with wall-mounted brackets for storing cutters out of the way.
Ideal for Cutting:
Foam board and gatorboard up to 3/8 inch
Mat board and Cardboard
Flexo plates up to .3" (unprocessed and processed).
PVC foam board up to .25" thick.
Foam centered board up to 1/4" thick, 0.5" with optional XR-Utility Blade.
Honeycomb and corrugated plastics.
Vinyl and plastic film.
Cardboard & corrugated cardboard.
|
|
|
KeenCut Javelin Cutter 40 inch 60180
Price: $615.00
Sale Price: $529.97
|
The Javelin is an ingenious cutting solution which offers a standard of straight, square and clean cutting that is impossible to achieve with a craft knife and straight edge. A safe, simple, extreme precision cutter requiring no special skills, the Javelin was specifically designed to cut large format graphics, pop ups, signs, plastic panels and much more. The unique design of the Javelin enables its straightness to be factory adjusted, using laser technology, to meet with today's very high standards for accurate butt joints on sectional panels and pop-up systems. The Javelin was specifically designed to cut large format graphics, pop-ups, signs, plastic panels and much more.
Whether used alone as a moveable cutting bar or in conjunction with the Keencut BIG bench to create a superb cutting table the Javelin is truly in a class of its own. Using the Javelin with the BIG bench could not be easier, just place the cutter bar on the material to be cut, align it with the image registration or crop marks, depress the cutting head and push or pull it along to cut. The BIG bench is recommended to ensure straightness and accuracy. The Javelin cutter bar is fitted with two full length rubber strips on the underside that grip tenaciously to any surface without marking Factory Laser truing guarantees accuracy to within .008” over the full length of the cut. For an even more precise cut add the Lift & Hold Mechanism to your workbench allowing you to turn your existing work surface into a precision cutting station. The lift and hold is recommended for cutters up to 80 inches.
FEATURES:
Ingenious cutting solution providing extremely straight, square and clean cuts impossible by hand
Uses standard replacement blades
Ergonomically contoured cutting head allows operator to comfortably push or pull it along to cut.
Includes 100 standard medium duty blades that can be changed in seconds with no tools.
Comes with wall-mounted brackets for storing cutters out of the way.
Ideal for Cutting:
Foam board and gatorboard up to 3/8 inch
Mat board and Cardboard
Flexo plates up to .3" (unprocessed and processed).
PVC foam board up to .25" thick.
Foam centered board up to 1/4" thick, 0.5" with optional XR-Utility Blade.
Honeycomb and corrugated plastics.
Vinyl and plastic film.
Cardboard & corrugated cardboard.
|
|
|
KeenCut Javelin Large Format Cutter 80 inch 60182
Price: $720.00
Sale Price: $599.97
|
The Javelin is an ingenious cutting solution which offers a standard of straight, square and clean cutting that is impossible to achieve with a craft knife and straight edge. A safe, simple, extreme precision cutter requiring no special skills, the Javelin was specifically designed to cut large format graphics, pop ups, signs, plastic panels and much more. The unique design of the Javelin enables its straightness to be factory adjusted, using laser technology, to meet with today's very high standards for accurate butt joints on sectional panels and pop-up systems. The Javelin was specifically designed to cut large format graphics, pop-ups, signs, plastic panels and much more.
Whether used alone as a moveable cutting bar or in conjunction with the Keencut BIG bench to create a superb cutting table the Javelin is truly in a class of its own. Using the Javelin with the BIG bench could not be easier, just place the cutter bar on the material to be cut, align it with the image registration or crop marks, depress the cutting head and push or pull it along to cut. The BIG bench is recommended to ensure straightness and accuracy. The Javelin cutter bar is fitted with two full length rubber strips on the underside that grip tenaciously to any surface without marking Factory Laser truing guarantees accuracy to within .008” over the full length of the cut. For an even more precise cut add the Lift & Hold Mechanism to your workbench allowing you to turn your existing work surface into a precision cutting station. The lift and hold is recommended for cutters up to 80 inches.
FEATURES:
Ingenious cutting solution providing extremely straight, square and clean cuts impossible by hand
Uses standard replacement blades
Ergonomically contoured cutting head allows operator to comfortably push or pull it along to cut.
Includes 100 standard medium duty blades that can be changed in seconds with no tools.
Comes with wall-mounted brackets for storing cutters out of the way.
Ideal for Cutting:
Foam board and gatorboard up to 3/8 inch
Mat board and Cardboard
Flexo plates up to .3" (unprocessed and processed).
PVC foam board up to .25" thick.
Foam centered board up to 1/4" thick, 0.5" with optional XR-Utility Blade.
Honeycomb and corrugated plastics.
Vinyl and plastic film.
Cardboard & corrugated cardboard.
|
|
|
KeenCut Max Cutter 140 inch 60960
Price: $955.00
Sale Price: $779.97
|
KEENCUT LARGE FORMAT SHEET MATERIAL PRECISION CUTTERS
Cuts Straight, Square & Clean - Ideal for producers of “Grand Format” images. Unique box-frame design provides straight, square and clean cuts up to 200” guaranteed to within .03” over the entire length of the cut.
Where the requirement is to cut materials wider than 3m (120”) the inbuilt rigidity of the Max allows the cutter bar to span the output of all “super-wide” format printers
Foster Precision Cutters are an ingenious cutting solution, offering a standard of straight, square and clean cutting that is impossible to achieve with a hand-held knife and straight edge and requires no special skills!
For cutting foam board, Gator, Sintra, Corrugated Plastic, Flexo Plates, Laminate, and more!
Key Features:
Ergonomically contoured cutting head allows operator to comfortably push or pull it along to cut
Cutters are fitted with two full-length rubber strips on the underside that grip surface without marking
Blades can be changed in seconds with no tools
Comes with wall-mounted brackets for storing cutters out of the way
Specifically designed to cut large format graphics - pop ups, signs, plastic panels and much more
ABLE TO CUT:
Flexo plates up to .3" (unprocessed and processed)
PVC foam board up to .25" thick
Foam centered board up to 1/4" thick, 0.5" with optional XR-Utility Blade
Honeycomb and corrugated plastics
Vinyl and plastic film
Cardboard & corrugated cardboard
Includes 100 standard medium duty blades that can be changed in seconds with no tools
Comes with wall-mounted brackets for storing cutter out of the way
|
|
|
KeenCut Max Precision Cutter - 160" 60962
Price: $990.00
Sale Price: $799.97
|
KEENCUT LARGE FORMAT SHEET MATERIAL PRECISION CUTTERS
Cuts Straight, Square & Clean - Ideal for producers of “Grand Format” images. Unique box-frame design provides straight, square and clean cuts up to 200” guaranteed to within .03” over the entire length of the cut.
Where the requirement is to cut materials wider than 3m (120”) the inbuilt rigidity of the Max allows the cutter bar to span the output of all “super-wide” format printers
Foster Precision Cutters are an ingenious cutting solution, offering a standard of straight, square and clean cutting that is impossible to achieve with a hand-held knife and straight edge and requires no special skills!
For cutting foam board, Gator, Sintra, Corrugated Plastic, Flexo Plates, Laminate, and more!
Key Features:
Ergonomically contoured cutting head allows operator to comfortably push or pull it along to cut
Cutters are fitted with two full-length rubber strips on the underside that grip surface without marking
Blades can be changed in seconds with no tools
Comes with wall-mounted brackets for storing cutters out of the way
Specifically designed to cut large format graphics - pop ups, signs, plastic panels and much more
ABLE TO CUT:
Flexo plates up to .3" (unprocessed and processed)
PVC foam board up to .25" thick
Foam centered board up to 1/4" thick, 0.5" with optional XR-Utility Blade
Honeycomb and corrugated plastics
Vinyl and plastic film
Cardboard & corrugated cardboard
Includes 100 standard medium duty blades that can be changed in seconds with no tools
Comes with wall-mounted brackets for storing cutter out of the way
|
|
|
KeenCut Max Precision Cutter - 180" 60964
Price: $1,060.00
Sale Price: $849.99
|
KEENCUT LARGE FORMAT SHEET MATERIAL PRECISION CUTTERS
Cuts Straight, Square & Clean - Ideal for producers of “Grand Format” images. Unique box-frame design provides straight, square and clean cuts up to 200” guaranteed to within .03” over the entire length of the cut.
Where the requirement is to cut materials wider than 3m (120”) the inbuilt rigidity of the Max allows the cutter bar to span the output of all “super-wide” format printers
Foster Precision Cutters are an ingenious cutting solution, offering a standard of straight, square and clean cutting that is impossible to achieve with a hand-held knife and straight edge and requires no special skills!
For cutting foam board, Gator, Sintra, Corrugated Plastic, Flexo Plates, Laminate, and more!
Key Features:
Ergonomically contoured cutting head allows operator to comfortably push or pull it along to cut
Cutters are fitted with two full-length rubber strips on the underside that grip surface without marking
Blades can be changed in seconds with no tools
Comes with wall-mounted brackets for storing cutters out of the way
Specifically designed to cut large format graphics - pop ups, signs, plastic panels and much more
ABILITY TO CUT:
Flexo plates up to .3" (unprocessed and processed)
PVC foam board up to .25" thick
Foam centered board up to 1/4" thick, 0.5" with optional XR-Utility Blade
Honeycomb and corrugated plastics
Vinyl and plastic film
Cardboard & corrugated cardboard
Includes 100 standard medium duty blades that can be changed in seconds with no tools
Comes with wall-mounted brackets for storing cutter out of the way
|
|
|
KeenCut Max Precision Cutter - 200" 60966
Price: $1,195.00
Sale Price: $949.99
|
KEENCUT LARGE FORMAT SHEET MATERIAL PRECISION CUTTERS
Cuts Straight, Square & Clean - Ideal for producers of “Grand Format” images. Unique box-frame design provides straight, square and clean cuts up to 200” guaranteed to within .03” over the entire length of the cut.
Where the requirement is to cut materials wider than 3m (120”) the inbuilt rigidity of the Max allows the cutter bar to span the output of all “super-wide” format printers
Foster Precision Cutters are an ingenious cutting solution, offering a standard of straight, square and clean cutting that is impossible to achieve with a hand-held knife and straight edge and requires no special skills!
For cutting foam board, Gator, Sintra, Corrugated Plastic, Flexo Plates, Laminate, and more!
Key Features:
Ergonomically contoured cutting head allows operator to comfortably push or pull it along to cut
Cutters are fitted with two full-length rubber strips on the underside that grip surface without marking
Blades can be changed in seconds with no tools
Comes with wall-mounted brackets for storing cutters out of the way
Specifically designed to cut large format graphics - pop ups, signs, plastic panels and much more
ABILITY TO CUT:
Flexo plates up to .3" (unprocessed and processed)
PVC foam board up to .25" thick
Foam centered board up to 1/4" thick, 0.5" with optional XR-Utility Blade
Honeycomb and corrugated plastics
Vinyl and plastic film
Cardboard & corrugated cardboard
Includes 100 standard medium duty blades that can be changed in seconds with no tools
Comes with wall-mounted brackets for storing cutter out of the way
|
|
|
KeenCut Practik Large Format Precision Cutter - 120" 60234
Price: $750.00
Sale Price: $699.97
|
KeenCut Practik Large Format Precision Cutter - 120" 60234
The Practik Precision 120 Inch Length Material Cutter is an ingenious, ecomomical cutting solution, offering a standard of straight, square and clean cutting that is impossible to achieve with a hand-held knife and straight edge and requires no special skills! The innovative design of the Practik guarantees straightness to be within 1mm (0.039") over its whole length.
Using Practik Sheet Material Cutters alone or with the BIG bench could not be easier, just place the cutter bar on the material to be cut, align it with the image registration or crop marks, depress the cutting head and push or pull it along to cut. Whether used alone as a moveable cutting bar or in conjunction with the Keencut BIG bench to create a superb cutting table. The Keencut Practik large format cutter is an outstanding general purpose material cutter and precision trimmer.
A Practical choice for cutting graphics, photos and signs mounted on foam-centered boards. Accuracy to within .03” guaranteed over the full length of the cut. For an even more precise cut add the Lift & Hold Mechanism to your work Bench allowing you to turn your existing work surface into a precision cutting station. The lift and hold is recommended for cutters up to 80"
FEATURES:
Ergonomically contoured cutting head allows operator to comfortably push or pull it along to cut.
Fitted with two full-length rubber strips on the underside that grip the surface without marking.
Includes 100 standard medium duty blades that can be changed in seconds with no tools.
Comes with wall-mounted brackets for storing cutters out of the way.
Specifically designed to cut large format graphics, pop ups, signs, plastic panels and much more.
Straight and accurate to within 0.03inch (0.2mm) over the entire length
Use the Practik alone or with the BIG bench
Ideal for Cutting:
Flexo plates up to .3" (unprocessed and processed).
PVC foam board up to .25" thick.
Foam centered board up to 1/4" thick, 0.5" with optional XR-Utility Blade.
Honeycomb and corrugated plastics.
Vinyl and plastic film.
Cardboard & corrugated cardboard.
Mat board
The Pratik ships on a skid by Truck and requires special packing because of the size.
|
|
|
KeenCut Practik Large Format Precision Cutter - 40" 60230
Price: $515.00
Sale Price: $499.97
|
The Practik Precision Material Cutter is an ingenious, ecomomical cutting solution, offering a standard of straight, square and clean cutting that is impossible to achieve with a hand-held knife and straight edge and requires no special skills! The innovative design of the Practik guarantees straightness to be within 1mm (0.039") over its whole length.
Using Practik Sheet Material Cutters alone or with the BIG bench could not be easier, just place the cutter bar on the material to be cut, align it with the image registration or crop marks, depress the cutting head and push or pull it along to cut. Whether used alone as a moveable cutting bar or in conjunction with the Keencut BIG bench to create a superb cutting table. The Keencut Practik large format cutter is an outstanding general purpose material cutter and precision trimmer.
A Practical choice for cutting graphics, photos and signs mounted on foam-centered boards. Accuracy to within .03” guaranteed over the full length of the cut. For an even more precise cut add the Lift & Hold Mechanism to your work Bench allowing you to turn your existing work surface into a precision cutting station. The lift and hold is recommended for cutters up to 80"
FEATURES:
Ergonomically contoured cutting head allows operator to comfortably push or pull it along to cut.
Fitted with two full-length rubber strips on the underside that grip the surface without marking.
Includes 100 standard medium duty blades that can be changed in seconds with no tools.
Comes with wall-mounted brackets for storing cutters out of the way.
Specifically designed to cut large format graphics, pop ups, signs, plastic panels and much more.
Straight and accurate to within 0.03inch (0.2mm) over the entire length
Use the Practik alone or with the BIG bench
Ideal for Cutting:
Flexo plates up to .3" (unprocessed and processed).
PVC foam board up to .25" thick.
Foam centered board up to 1/4" thick, 0.5" with optional XR-Utility Blade.
Honeycomb and corrugated plastics.
Vinyl and plastic film.
Cardboard & corrugated cardboard.
Mat board
|
|
|
KeenCut Practik Large Format Precision Cutter - 80" 60232
Price: $565.00
Sale Price: $529.97
|
The Practik Precision Material Cutter is an ingenious, ecomomical cutting solution, offering a standard of straight, square and clean cutting that is impossible to achieve with a hand-held knife and straight edge and requires no special skills! The innovative design of the Practik guarantees straightness to be within 1mm (0.039") over its whole length.
Using Practik Sheet Material Cutters alone or with the BIG bench could not be easier, just place the cutter bar on the material to be cut, align it with the image registration or crop marks, depress the cutting head and push or pull it along to cut. Whether used alone as a moveable cutting bar or in conjunction with the Keencut BIG bench to create a superb cutting table. The Keencut Practik large format cutter is an outstanding general purpose material cutter and precision trimmer.
A Practical choice for cutting graphics, photos and signs mounted on foam-centered boards. Accuracy to within .03” guaranteed over the full length of the cut. For an even more precise cut add the Lift & Hold Mechanism to your work Bench allowing you to turn your existing work surface into a precision cutting station. The lift and hold is recommended for cutters up to 80"
FEATURES:
Ergonomically contoured cutting head allows operator to comfortably push or pull it along to cut.
Fitted with two full-length rubber strips on the underside that grip the surface without marking.
Includes 100 standard medium duty blades that can be changed in seconds with no tools.
Comes with wall-mounted brackets for storing cutters out of the way.
Specifically designed to cut large format graphics, pop ups, signs, plastic panels and much more.
Straight and accurate to within 0.03inch (0.2mm) over the entire length
Use the Practik alone or with the BIG bench
Ideal for Cutting:
Flexo plates up to .3" (unprocessed and processed).
PVC foam board up to .25" thick.
Foam centered board up to 1/4" thick, 0.5" with optional XR-Utility Blade.
Honeycomb and corrugated plastics.
Vinyl and plastic film.
Cardboard & corrugated cardboard.
Mat board
|
|
|
KeenCut Practik Precision Cutter 100 in. 60233
Price: $625.00
Sale Price: $599.97
|
The Practik Precision Material Cutter is an ingenious, ecomomical cutting solution, offering a standard of straight, square and clean cutting that is impossible to achieve with a hand-held knife and straight edge and requires no special skills! The innovative design of the Practik guarantees straightness to be within 1mm (0.039") over its whole length.
Using Practik Sheet Material Cutters alone or with the BIG bench could not be easier, just place the cutter bar on the material to be cut, align it with the image registration or crop marks, depress the cutting head and push or pull it along to cut. Whether used alone as a moveable cutting bar or in conjunction with the Keencut BIG bench to create a superb cutting table. The Keencut Practik large format cutter is an outstanding general purpose material cutter and precision trimmer.
A Practical choice for cutting graphics, photos and signs mounted on foam-centered boards. Accuracy to within .03” guaranteed over the full length of the cut. For an even more precise cut add the Lift & Hold Mechanism to your work Bench allowing you to turn your existing work surface into a precision cutting station. The lift and hold is recommended for cutters up to 80"
FEATURES:
Ergonomically contoured cutting head allows operator to comfortably push or pull it along to cut.
Fitted with two full-length rubber strips on the underside that grip the surface without marking.
Includes 100 standard medium duty blades that can be changed in seconds with no tools.
Comes with wall-mounted brackets for storing cutters out of the way.
Specifically designed to cut large format graphics, pop ups, signs, plastic panels and much more.
Straight and accurate to within 0.03inch (0.2mm) over the entire length
Use the Practik alone or with the BIG bench
Ideal for Cutting:
Flexo plates up to .3" (unprocessed and processed).
PVC foam board up to .25" thick.
Foam centered board up to 1/4" thick, 0.5" with optional XR-Utility Blade.
Honeycomb and corrugated plastics.
Vinyl and plastic film.
Cardboard & corrugated cardboard.
Mat board
|
|
|
KeenCut Practik Precision Cutter 60 in. 60231
Price: $535.00
Sale Price: $469.97
|
The Practik Precision Material Cutter is an ingenious, ecomomical cutting solution, offering a standard of straight, square and clean cutting that is impossible to achieve with a hand-held knife and straight edge and requires no special skills! The innovative design of the Practik guarantees straightness to be within 1mm (0.039") over its whole length.
Using Practik Sheet Material Cutters alone or with the BIG bench could not be easier, just place the cutter bar on the material to be cut, align it with the image registration or crop marks, depress the cutting head and push or pull it along to cut. Whether used alone as a moveable cutting bar or in conjunction with the Keencut BIG bench to create a superb cutting table. The Keencut Practik large format cutter is an outstanding general purpose material cutter and precision trimmer.
A Practical choice for cutting graphics, photos and signs mounted on foam-centered boards. Accuracy to within .03” guaranteed over the full length of the cut. For an even more precise cut add the Lift & Hold Mechanism to your work Bench allowing you to turn your existing work surface into a precision cutting station. The lift and hold is recommended for cutters up to 80"
FEATURES:
Ergonomically contoured cutting head allows operator to comfortably push or pull it along to cut.
Fitted with two full-length rubber strips on the underside that grip the surface without marking.
Includes 100 standard medium duty blades that can be changed in seconds with no tools.
Comes with wall-mounted brackets for storing cutters out of the way.
Specifically designed to cut large format graphics, pop ups, signs, plastic panels and much more.
Straight and accurate to within 0.03inch (0.2mm) over the entire length
Use the Practik alone or with the BIG bench
Ideal for Cutting:
Flexo plates up to .3" (unprocessed and processed).
PVC foam board up to .25" thick.
Foam centered board up to 1/4" thick, 0.5" with optional XR-Utility Blade.
Honeycomb and corrugated plastics.
Vinyl and plastic film.
Cardboard & corrugated cardboard.
Mat board
Shipping Weight: 13 lbs. Ships by UPS. Special Packaging required.
|
|
Need Help? Call 1-866-432-0042
|
|
 |
|
 |
|
